Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-396status bri-port
8
Table 8-3. Status BRI-Port Command Interpretation
Endpoint
Types
TEI
Range Layer 2 State
Voice
Extension
Service
SPID Description / Recommendation
ASAI, BRI 0-126 Assigned blank blank Transitory state for BRI
endpoints and ASAI adjuncts.
Link establishment is being
attempted by the switch.
1. Check the endpoint and
wiring by following the SPID
Facility Test Procedure
described in the BRI-SET
(ISDN-BRI Set/ASAI Adjunct)
Maintenance
documentation.
2. Verify the repair by
executing the status
bri-port PCSSpp
command. Determine that
the L2 state of the signaling
link is L3-Established for
ASAI adjuncts and BRI
endpoints supporting MIM
(management information
messages) initialization and
Established for fixed TEIBRI
endpoints and automatic
TEIBRI endpoints not
supporting MIM initialization.
NOTE:
A MIM is a level-3
message that conveys
management and
maintenance information
between a
communications system
and a BRI terminal.
Continued on next page