Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-470status link
8
Error Messages
If the specified link number is invalid, the following message is displayed:
Link out of range, please press HELP
If the specified link number is not administered, the following message is
displayed:
Link not administered
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message is displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message is displayed:
All maintenance resources busy; try again later
DEFINITIONS
Link A synchronous connection between the Definity system and an
adjunct or another switch. The link consists of three protocol
levels. The entire link is identified by a link number which is
specified on the "change communications-interface links" form.
Level 1 Physical connection of a port on a Processor Interface board to
hardware which serves the same purpose on the adjunct or switch
(for example, a PI board or an SCP board on Audix). There can be
several components between these two endpoints (modems, DS1
facilities, cables, and so forth).