Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-346set options
8
NOTE: Alarms can’t be upgraded.
Defaults
Initially, the alarm reporting options for On-board Trunk Alarms (Alarm Group 1),
both Major and Minor, and Minor, and the Memory Card Capacity Alarm are set
to "yes" (y); all others are set to "warning" (w). All trunk groups are associated with
alarm severity group 1 by default.
Parameters
None.
Help Messages
If the user presses HELP after entering "set options," the following message is
displayed:
Entry is not required
Error Messages
If the command entered is in conflict with another currently executing command,
then a message is displayed showing the login id of the conflicting user and the
conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message is displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message is displayed:
All maintenance resources busy; try again later
Form Input
After entering the command "set options," the user is presented with the following
form.