Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-635test pkt
8
If the port network on which the desired Packet bus resides is unavailable, the
following message will be displayed:
EPN is not available
For any system, if the length of the user entered parameter "port network"
exceeds 3 the following message will be displayed:
Entry invalid
If the packet bus is not activated the following message will be displayed:
Packet Bus is not activated,
check system-parameters maintenance form
If no tests can be found for the associated MO, the following message is
displayed:
No tests for this MO
If the software data cannot be sent to the SAT, the following message is
displayed:
Error encountered, can’t complete request
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
Output
The responses will be displayed on a test-by-test basis with one line of data
displayed for each test result.
Port A port network number is displayed (1-3).
Maintenance Name The type of maintenance object that is being tested.
Alt. Name Not applicable.