Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-391status bri-port
8
Synopsis
status bri-port location
print
Permissions
The following default logins may execute this command: system technician,
inads, cust, init, nms, browse.
Examples
status bri-port 1c0701
status bri-port 1c0701 print
Description
The status bri-port command displays the service state, maintenance state and
layer 1 state of an ISDN-BRI port. Also displayed on this form is information on
the point-to-point signaling links transported over the port.
Defaults
None.
Parameters
Help Messages
If the system technician presses HELP after entering "status bri," the following is
displayed:
Enter an isdn-bri port location, [’print’]
Error Messages
If the format of the port location is incorrect, the following message is displayed:
Port/Board invalid
If the port location entered is not between 5 and 7 characters long, the following
message is displayed:
location A "location" represents the physical position of the port to be busied out
and is entered as "UUcSSpp" where "UU" represents the cabinet
number (1-3), "c" represents the carrier, "SS" represents the slot
position, and "pp" represents the circuit (port).
print This will cause the report to be printed if a printer is linked to the SAT.