Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-16busyout link
8
Feature Interactions
The maintenance of a particular component on a link will sometimes interfere with
the maintenance of the link itself. Maintenance can put a link component in a
busy state causing link set-up to fail. Frequent attempts at re-setup of a link may
delay the recover of a faulty component, due to the maintenance test of a
component only taking place when the component is idle. Therefore, the
technician needs to be able to disable the attempted re-setup of a link. The
busyout command is used to do this, and will not cause the link to be torn down.
If the link is already down, the busyout command will stop periodic re-setup trys
on the link.
busyout link
This command will busyout the system technician specified link.
Synopsis
busyout link link-id
Permissions
The following default logins may execute this command: system technician,
inads, init.
Examples
busyout link 1
Description
The busyout link command will put the maintenance objects associated with a
specified link in a maintenance busy state. There will be no periodic or
scheduled tests performed on the busied out maintenance objects until they are
busyout journal-printer wakeup-log SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
0 JRNL-LINK PASS
Command successfully completed