Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-34busyout sp-link
8
Synopsis
busyout sp-link
Permissions
The following default logins may execute this command: system technician,
inads, init.
Examples
busyout sp-link
Description
The busyout sp-link command will put the system printer link into a maintenance
busy state. There will be no periodic or scheduled maintenance performed on
the busied out system printer link until it is released. Warning alarms are
generated (error type 18) on each maintenance object busied out, so that INADS
can access the state of the object. Placing the system printer link in a busyout
state will prevent access to the system printer. The release sp-link command will
return the system printer link to operation.
The system printer link is a link from the switch to an external printer over which
jobs can be printed. This link is created by administering the system printer
extension and setting up a call to the system printer.
Defaults
No defaults.
Parameters
None.
Help Messages
If the system technician presses HELP after entering "busyout sp-link," the
following is displayed:
Entry is not required
Error Messages
If the system printer link is not administered, the following message is displayed:
Link not administered or not enabled