Lucent Technologies R5SI Computer Hardware User Manual


  Open as PDF
of 2643
 
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-238mark port
8
SUMMARY REPORT Output
For the following example, the command that was entered is "list testcalls
summary grp 80."
mark port
This command marks a port as unusable.
Trk Grp Num The trunk group number which is being summarized. Only outgoing or
two-way analog trunks will be listed.
Num Of Trks The total number of members per trunk group.
Last Test Date The date of the oldest measurement in the trunk group.
Last Test
Time
The time of the oldest measurement in the trunk group.
Trunks
Passed
Transm Test
The number of trunks that have passed the trunk transmission tests.
Trunks Failed
Marginal
Threshld
The number of trunks that failed a marginal threshold, but not an
unacceptable threshold according to the threshold values defined on
the trunk group form.
Trunks Failed
Unaccept
Threshld
This is taken from the unacceptable threshold administered on the
Trunk group form.
Trks In-Use The number of trunks that were in-use at the time of testing.
Trks Not Test The number of trunks that were not tested due to error conditions.
Busied Out
Trunks
The number of trunks that were busied out at the time. This could be
due to hardware problems, incorrect threshold values, etc.
list testcalls summary grp 80 SPE A
ATMS MEASUREMENT SUMMARY REPORT
Trunks Trunks Trunks
Trk Num Last Last Passed Failed Failed Trks Trks Busied
Grp Of Test Test Transm Marginal Unaccept In- Not Out
Num Trks Date Time Test Threshld Threshld Use Test Trunks
80 19 0 0 0 0 19 19
Command successfully completed