Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-275release board
8
Error Messages
If the format of the board location is incorrect, the following error message will be
displayed:
Port/Board invalid
If the EPN on which the board resides is not available, the following message will
be displayed:
EPN is not available
If a board is not inserted in the specified location, the following message will be
displayed:
Board not assigned
If the specified board does not have any maintenance objects associated with it,
the following message will be displayed:
No MO in this board
If the specified board is a EI board and it is part of the active link, the following
message will be displayed:
Illegal Command for active object; use ’set’ to switch to
standby
If a reset is attempted on an invalid board in the service slot, the following
message is displayed:
Board invalid
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear, and then
resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later