Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-380status audits
8
Feature Interactions
None.
status audits
This command will display the status of all of the Data Relation Audits that have
detected a problem or that have aborted.
Synopsis
status audits [ peak-hour | cumulative ]
[ print | schedule ]
Permissions
The following default logins may execute this command: inads, init.
Examples
status audits cumulative
status audits cumulative print
status audits cumulative schedule
status audits peak-hour
status audits peak-hour print
status audits peak-hour schedule
Description
This command is used to display the results of the execution of the Data Relation
Audits that are built into the switch. Data Relation Audits are used to check for
inconsistencies between selected data items in the switch, to report any
inconsistencies found and to take corrective action if possible. Data Relation
status attendant 1
ATTENDANT STATUS
Console Number: 1 Service State: in-service/night service
Port: 01C1106 Maintenance Busy? no
Connected Ports:
Command successfully completed