Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-278release cdr-link
8
Error Messages
If the cdr-link is not administered, then the following message will be displayed:
Link not administered
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear, and then
resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
Output
For the following output example, assume that the command that was entered is
"release cdr-link primary."
Port Not applicable. Will always be blank.
Maintenance Name The type of maintenance object that is being released. If releasing
the primary cdr-link the maintenance object will be PRI-CDR, else
if releasing the secondary cdr-link the maintenance object will be
SEC-CDR.
Alt. Name Not applicable. Will always be blank.
Result The result of the release - "PASS," "ABORT," "FAIL."
Error Code A system-generated number that tells why the release failed or
aborted. A detailed list of the codes can be found in the
"Busyout/Release Commands" section of this chapter.
release cdr-link primary
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
PRI-CDR PASS
Command successfully completed