Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-338save announcements
8
If the announcement data module is not administered or is currently in use, the
following message is displayed:
Required data module not administered or unavailable
If there is no announcement board in the system, the following message is
displayed:
Integrated announcement board not present
If the standby processor times out, the following message is displayed:
Command timed out on standby processor
If an inconsistency between the NETCON data module and the announcement
data module exists (e.g. both data modules using the same COR) the following
message is displayed:
System error, please try later
If the NETCON data module is not administered or out of service the following
message is displayed:
Required NETCON data module not
administered or out-of-service
If the NETCON data module is busy the following message is displayed:
Required NETCON data module unavailable
If the time of day is not set, the following message is displayed:
Please set the time of day before proceeding
If the standby SPE is inaccessible, the following message is displayed:
Cannot access the standby SPE at this time
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict