Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
LED Interpretation
Page 7-4Duplication Interface Circuit Pack LEDs
7
to either the ‘‘A’’ position or the ‘‘B’’ position. Thus, when both SPE Select
switches have been moved to either ‘‘A’’ or ‘‘B,’’ the OVERRIDE LED turns red
and lights steadily.
NOTE:
Failure to move both SPE Select switches to the same position causes the
system to retain control of processor selection.
To return control of the SPE selection to the system, return the SPE Select
switches on both Duplication Interface circuit packs to the AUTO position (one at
a time to avoid accidentally selecting the other SPE). The OVERRIDE LED goes
dark.
Figure 7-2. Duplication Interface Circuit Pack Indicators
OVERRIDE
SPE
AUTO
A B
ALARM LED (RED)
TEST LED (GREEN)
BUSY LED (AMBER)
SPE SELECT LED (RED)
SPE SELECT SWITCH