Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-504status station
8
Output
For the following output example, the command status sp-link was entered.
Feature Interactions
None.
status station
status station - This command displays the status of a station.
Synopsis
status station extension
print
Link State: This field displays the operational mode of the link. A state of "up,"
"down," or "extension not administered" is displayed. A state of "up"
means that the link is administered and a call is setup between the
switch and the system printer. A state of "down" means that the link
is administered, but a call is not setup between the switch and the
system printer. A state of "extension not administered" means that
the link is not administered (no system printer extension has been
administered).
Number of Retries: This field is displayed only if the "Link State:" is "down." The field
displays the number of times the switch has tried to set up the link
since a request to set up the link has been received. The largest
number that can be displayed is "999". If more than "999" retries
have occurred, "999" is still displayed.
Maintenance Busy? This field displays whether any maintenance testing is being
performed on the system printer link. Values of "yes" and "no" are
displayed if the system printer link is administered (the system
printer extension is administered). Blanks are displayed if the
system printer link is not administered.
status sp-link SPE A
SYSTEM PRINTER LINK STATUS
Link State: up
Number of Retries:
Maintenance Busy? no