Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-229list mst
8
X.25 Errors
0xF0 - X.25 Error Message (Outgoing Message
Lost)
Note that 0xA2, 0xF0 and 0xF2 messages will be turned on by responding ’y’ to
the ’Application Errors?’ field.
Version 1:
Version 2:
Reason Codes:
In abbreviated mode, the application message is not saved.
Message[1] = processor channel number
Message[2] = sequence number
Message[3+] = message
Message[1] = processor channel number
Message[2] = sequence number
Message[3] = reason code
Message[4+] = message
0x00 /* message lost */
/* 1 reserved */
0x02 /* message ignored, sequence number is within window but less
* than expected
*/
0x03 /* message ignored, bad sequence number */
0x04 /* message ignored, other port has sent a disconnect message */
0x05 /* message ignored, send request is rejected*/
0x06 /* message ignored, from ig_l3 */
0x07 /* message ignored, from l3_err */
0x08 /* sequence number is within window but less
* than expected (resync)
*/
0x09 /* bad sequence number (resync) */