Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Management Terminals
Page 3-7System Login Procedure
3
■ Login type
■ Service level
■ Disable following a security violation value
■ Access to Inads Port value
■ Password aging cycle length
■ Facility test call notification and acknowledgment
■ Remote access notification and acknowledgment
To List Logins
1. Enter the command list logins.
The system displays the following information for all current logins:
■ Name
■ Service level
■ Status (active, inactive, disabled, svn-disabled, void)
■ Password aging cycle length
The system displays only those logins with the same, or lower, service
level as the requestor.
To Remove a Login
1. Enter the command remove login [login name].
The system displays the Login Administration form.
2. Press the
ENTER key to remove the login, or press Cancel to exit the
remove login procedure without making a change.
To Test a Login
1. Enter your login name at the login prompt.
2. After the user enters the correct login name and password and the login is
administered correctly, the system displays the command line interface.
Administering Customer Logins and Forced
Password Aging
Adding Customer Logins and Assigning Initial
Password
To add a customer login you must be a super-user, have administrative
permissions, and: