Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-480status logins
8
Login Id This field shows the login id of the user that is currently logged into the
system. The value of "LOGIN" means that the terminal is connected to that
port and the login prompt is displayed, but no user is currently logged on. An
asterisk in the login id field identifies your login.
Type This identifies the type of connection that is associated with the login
session. Following are the values for this field:
Login
Type Description
NET This represents a dialed-in connection via a Netcon data channel.
EPN This represents a connection to the SAT port of an EPN maintenance
board. This is accomplished via a hard-wired connection to that port.
MGR1 This signals a physical connection to the local SAT port on the active
processor carrier. This port is accessed via a hard-wired connection.
INADS This represents a connection to the remote SAT port on the active
processor carrier. This port is normally accessed via a dial-in connection.
SYS-PTR This identifies that the system printer is active in the system. The login will
be the id of the user who requested the print job, and the active command
will be the command used for the print.
Location This identifies the physical location where the user or printer is
connected into the switch.
For the types of MGR1 and INADS, this value will be the processor
board location. For the EPN type, this will be the EPN maintenance
board location. For the NET type this will be the physical location of the
terminal port where the customer’s SAT is connected. For a BRI NET
connection the BRI endpoint is the last 3 digits, and for the SYS-PTR
type this is the physical location of the printer port.
Aux This field give additional location information.
For the types of MGR1 and INADS, this field will contain the port
network number of the processor board (that is, 1). For the EPN type,
this field will contain the port network number of the EPN maintenance
board. For the NET and SYS-PTR types, this field will contain the
Netcon data channel number (1-4).
Active
Command
This field displays the currently executing command, entered by the
user logged into the system at the specified location. If the user has no
command currently executing, then the field is empty.