Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-763HYB-LINE (Hybrid Line)
10
Table 10-213. TEST #61 Hybrid Line Audits Test
Error
Code
Test
Result Description/ Recommendation
ABORT Internal System Error
1 ABORT The test was aborted due to an internal system error
during the switchhook audit.
2 ABORT Internal System Error occurred during bad scan inquiry
audit.
1. Make sure that the station is not in an out of service
state.
2. Retry the command at 1-minute intervals a maximum
of 5 times.
3. If the test continues to abort, escalate the problem.
3 ABORT This port may have been busied out by system
technician.
1. Look in the Error Log for Error Type 18 (port busied
out) for this port. If this error type is present, the
release the port via the release station
<extension> command and run the test again.
2. Make sure that the terminal is connected.
3. Retry the command at one-minute intervals a
maximum of five times.
4. If the test continues to abort, escalate the problem.
Continued on next page