Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-587test hardware-group
8
Board not assigned
If an invalid carrier is specified with the "test hardware-group carrier" command
the following message will be displayed:
Invalid carrier specified
If an invalid cabinet is specified with the "test hardware-group cabinet" command
the following message will be displayed:
Invalid cabinet specified
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
FORM INPUT
Once the user has entered the desired action (test hardware-group) and the
object (board, carrier, etc.), then the user is presented with an options form.
Test sequence This allows the user to specify whether the short (nondestructive) or
the long (more comprehensive and still nondestructive) test sequence
should be exercised.
Test Repetition This allows the user to enter either ’repeat’ with a corresponding
repeat value (between 1 and 99) or ’continuously’. The repeat option
will cause each test to be executed the number of times specified on
each physical object. The continuously option, on the other hand, will
cause all tests on all the hardware specified to be executed until the
CANCEL key is hit or the ’cancel hardware-group’ command is run.
count: This field allows the technician to enter a repeat value between 1 and
99. If the ’test sequence’ field is set to continuously, then this field is
removed from the screen. When the ’test sequence’ field is set to
repeat, then this field is added to the screen.
Auto-page? This option provides the ability to continue testing and display of test
results by providing a new screen every time the SAT screen is filled
with test results. The screen does not scroll to accommodate new
results; instead a new screen is provided after the current screen fills
up.
This option is not allowed if the ’background’ option has been chosen.
If the ’auto-page’ option is not specified, the SAT screen will not be
refreshed once it is filled with test results and testing will stop until the
user enters the ’page’ key to continue or ’cancel’ key to halt the testing.