Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-199list mst
8
Help Messages
If the user presses HELP after entering "list mst" the following message will be
displayed:
Enter [ ’from’ 0-32767 ] [ ’count’ 1-9998 ]
[ ’fifo’ or ’lifo’ or ’continuous’ ]
[ ’auto-page’ ] [ ’print’ or ’schedule’ ]
Error Messages
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
Output
The responses will be displayed on a message by message basis with one or
more lines of data displayed for each message traced.
auto-page The screen will automatically page when full. When used in
combination with "continuous" this provides a nice way to
"watch" the trace as messages arrive.
schedule This parameter will allow access to the system printer feature.
The "continuous" option may not be combined with this
option.
print This parameter will cause the output to be printed by a printer
at the SAT.
Number The sequence number for the message.
Date/Time The Date/Time.
Type MST message type, ex. 60 == ISDN uplink, 62 == ISDN downlink,
6C == ISDN level 2 primitive.
Message Message text in hexadecimal (ISDN or X.25).