Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-309release tdm
8
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
Output
For the following output example, assume that the command that was entered is
"release tdm port-network 1 bus a."
Feature Interactions
If a bus is busied out, no calls will be torn down. However, no new calls will be set
up on the busied out bus.
Dedicated tone time slots must be moved to another bus (the other half of the
duplicated bus) before a busyout of a particular bus will be allowed.
Port The port network number (preceded by "PN") and the bus ("A" or
"B") associated with the TDM bus.
Maintenance Name TDM-BUS is the maintenance object being released.
Alt. Name Not applicable.
Result The result of the release -"PASS," "ABORT," "FAIL,"
Error Code A system-generated number that tells why the release failed or
aborted. A detailed list of the codes can be in the
"Busyout/Release Commands" section of this chapter.
release tdm port-network 1 bus a
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
PN 01A TDM-BUS PASS
Command successfully completed