Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-162enable mst
8
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear and then resubmit
Output
After the user has entered the command and the command is successful, the
following message appears at the bottom of the screen:
Command successfully completed
Feature Interactions
None.
enable mst
This command allows the user to enable the trace buffer.
Synopsis
enable mst
Permissions
The following default logins may execute this command: inads, init.
Examples
enable mst
Description
Enables the message trace. The trace is controlled according to the parameters
on the "change mst" screen. If executed while the trace is enabled, it has no
effect and indicates that it worked.
Defaults
None.
Parameters
None.