Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-261CARD-MEM (Memory Card)
10
104 FAIL Directories in the memory card are corrupted and cannot be recovered.
105 FAIL "0" cannot be written into memory before an erase operation.
106 FAIL Memory card cannot be erased.
107 FAIL Data cannot be written into a memory card after the erase operation.
Maintenance cannot restore the missing or broken directory file in the
inserted memory card.
1. Replace the memory card with a new, formatted one.
2. Retry the command at 1-minute intervals a maximum of 5 times.
108 FAIL 12 volt power supply for directory recovery can’t be turned on. The 12 volt
power supply on TN777B NETCON circuit pack may be defective.
1. Re-enter the test card-mem command, and verify the result of Test
701 for 12 Volt Power Supply.
2. If Test 701 fails, follow the Standard Repair Procedure to replace the
TN777B NETCON circuit pack with a new TN777B circuit pack.
3. Retry the command at 1-minute intervals a maximum of 5 times.
PASS Both directory files in the inserted memory card are sane.
Table 10-81. TEST #699 Memory Card Directory Recovery Test — Continued
Error
Code
Test
Result Description/ Recommendation
Continued on next page