Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-1141PR-MAINT (Maintenance Processor [TN790 RISC Systems])
10
d. This test only runs on the active SPE.
e. This test aborts if an external modem is not administered.
MTP Reset Test (#101)
This test is destructive.
The test resets the Maintenance Processor. The destructive nature of this test
causes the following:
■ System Access Terminal to log off
■ DCE port to terminate data transmission
■ Any current memory card access to terminate and also to tear down any
remote access INADS connection
Table 10-336. TEST #101 MTP Reset Test
Error
Code
Test
Result Description/ Recommendation
100 ABORT The requested test did not complete within the allowable time period.
1. Retry the command.
1029
2014
2015
2016
2017
2018
2020
2022
2024
2025
2051
ABORT Refer to “STBY-SPE” for a description of these error codes.
2500 ABORT Internal system error
1. Retry at 1-minute intervals a maximum of 5 times.
1196 FAIL The MTP did not respond to being reset.
1. Retry at 1-minute intervals a maximum of 5 times.
2. If the test continues to fail, replace the Processor circuit pack.
Continued on next page