Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-492status pri-endpoint
8
Examples
status pri-endpoint 25012
status pri-endpoint 77868
status pri-endpoint 66078 print
Description
The status pri-endpoint command displays internal software state information for
diagnosis. This command can help locate facilities with which a PRI endpoint is
communicating. Status information for each of the B-channels making up the PRI
endpoint are displayed in addition to some overall PRI endpoint information.
Defaults
No defaults.
Parameters
Help Messages
If the user presses HELP after entering "status pri-endpoint", the following
message is displayed:
Enter assigned extension, [’print’]
Error Messages
If the format for the extension is incorrect, the following error message will be
displayed:
Extension invalid
If the extension is not administered, the following message will be displayed:
Extension not assigned
If the object associated with the specified extension is not a PRI endpoint, the
following message will be displayed:
Extension assigned to object other than pri-endpoint
If the board that contains the PRI endpoint is not inserted in the system, the
following message will be displayed:
extension The extension number of the PRI endpoint to be displayed. The number
of digits in an extension is determined by the dial-plan.
print This causes the report to be printed if a printer is connected to the SAT.