Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-1356TAPE (Tape Unit) [G3iV1.1-286]
10
Tape Reset Test (#67)
This test resets the tape portion of the Processor on the Maintenance/Tape
Processor (PR-MAINT), and it resets the shared RAM on the Processor circuit
pack (TN770). The test can pass when no drive is present because it never
accesses the tape drive.
Table 10-409. TEST #66 Tape Diagnostic Test
Error
Code
Test
Result Description/ Recommendation
1029 to
2051
ABORT Refer to the STBY-SPE (Standby SPE) Maintenance
documentation for a description of these error codes.
9000’s ABORT
or FAIL
Refer to Table A in ‘‘
Tape Unit Aux Data/Error Codes
Tables’’ and follow the recommended repair strategy for
specific Aux Data.
Any
Others
ABORT
or FAIL
Refer to Table B in ‘‘
Tape Unit Aux Data/Error Codes
Tables’’ and follow the recommended repair strategy for
specific Aux Data.
PASS This is a comprehensive test of the Tape Unit. The test
verifies that the tape drive is in good working order.
Continued on next page
Table 10-410. TEST #67 Tape Reset Test
Error
Code
Test
Result Description/ Recommendation
1029 to
2051
ABORT Refer to the STBY-SPE (Standby SPE) Maintenance
documentation for a description of these error codes.
9000’s FAIL Refer to Table A in ‘‘
Tape Unit Aux Data/Error Codes
Tables’’ and follow the recommended repair strategy for
specific Aux Data.
Any
Others
FAIL Refer to Table B in ‘‘
Tape Unit Aux Data/Error Codes
Tables’’ and follow the recommended repair strategy for
specific Aux Data.
PASS Communication with the tape processor is possible at a
very basic level.
Continued on next page