Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-457status health
8
Description
The status health command displays the current system alarm summary,
maintenance busy summary, user summary, critical system status, and cabinet
status. This is the same page that is displayed when "monitor health" is entered,
except with the "status health" command the output page is not updated
periodically.
Defaults
None.
Parameters
Help Messages
If the system technician presses HELP after entering "status health", the following
object command word choices will be displayed:
[’print’]
Error Messages
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
Output
print This will cause the report to be printed if a printer is linked to the SAT.
Major The number of logged major alarms is displayed as a number ranging
from 0 to 200. Up to 200 major alarms can be reported in the alarm log;
therefore, this is the maximum which can be displayed.
Minor The number of logged minor alarms is displayed as a number ranging
from 0 to 200. Up to 200 minor alarms can be reported in the alarm log;
therefore, this is the maximum which can be displayed.
Warning The number of warnings logged in the alarm file is displayed as a value
between 0 and 200, which is the maximum number of warnings
permitted.