Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-267recycle carrier
8
Help Messages
If the system technician presses HELP after entering "recycle carrier" on a
simplex SPE system, the following message will be displayed:
Enter [cabinet(1-3)];carrier(B-E)
If the system technician presses HELP after entering "recycle carrier" on a duplex
SPE system, the following message will be displayed:
For cabinet 1 enter [cabinet(1)];carrier(C-E)
For cabinet 2-3 enter cabinet (2-3);carrier(B-E)
Error Messages
If no location is entered, the following message will be displayed:
Identifier command word(s) omitted; please press help
If a location greater than three characters is entered, the following message will
be displayed:
Entry invalid
If the location entered is longer than 3 characters or less than 1 character the
following will be displayed:
Invalid carrier specified
If the cabinet and carrier specified are in an EPN that is not available, the
following message will be displayed:
EPN is not available
If a cabinet number of "1" or "01" is entered and the carrier specified is "A" or "B" in
an SPE duplex system, the carrier specified is "A" in a SPE simplex system or if
the "A" carrier is specified with a cabinet other than "1" or "01, or an SCC carrier
location is given," the following message will be displayed:
Cannot recycle control carriers or XE carriers
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
login id’:’command’ has a command conflict
Output
The responses will be displayed on a test-by-test basis with one line of data
displayed for each test result.