Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-591test hardware-group
8
Field Error Message
Following are the error message that will be displayed on the screen. The
message are displayed when the system technician tabs out of a field and the
validation routines are executed. In the following messages, an "x" represents
what was entered by the user.
Output
If the ’background’ option was chosen then the following message is displayed:
Command started in background mode
Progress information will be displayed on the SAT screen for a "test
hardware-group" command run in the foreground. While testing is in progress, a
running count of MOs tested, the total number of MOs to be tested, and the
current pass number will be displayed on the screen.
If the all-ports option is entered the following message will be displayed before
testing has begun:
Preparing unadministered ports for testing
If the "failures" option was selected and no tests fail the following message will be
displayed:
No failing test results available
Test sequence "x" is an invalid entry, please press HELP
Test Repetition "x" is an invalid entry, please press HELP
"x" The background option cannot be chosen with continuous
testing
count: Entry must be all digits
Entry out of range
Auto-page? "x" is an invalid entry, please press HELP
"x" The auto-page and background options may not both be
activated
Background? "x" is an invalid entry, please press HELP
"x" The background option cannot be chosen with continuous
testing
"x" The auto-page and background options may not both be
activated
Failures? "x" is an invalid entry, please press HELP
All-ports? "x" is an invalid entry, please press HELP
SPE-interchange? "x" is an invalid entry, please press HELP