Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-1217S-SYN-PT (Speech Synthesis Port)
10
Speech Synthesis DTMF Receiver Inquiry Test
(#164)
This test determines the sanity of the port’s DTMF receiver. The on-board
microprocessor tests the port’s DTMF receiver and determines if it is in a sane
(test passes) or insane (test fails) condition.
2000 ABORT Response to the test request was not received within the
allowable time period.
2100 ABORT Could not allocate the necessary system resources to
run this test.
1. Retry the command at one-minute intervals a
maximum of five times.
2. If the test continues to abort, escalate the problem.
Any FAIL DTMF tones were not detected. This type of failure may
cause features using touch-tone input to the Speech
Synthesis Port to malfunction.
1. Verify that the Tone-Clock circuit pack is functioning
correctly by checking the Error Log and using the
test tone-clock long command.
2. If the test fails again, replace the Speech Synthesis
circuit pack.
PASS The port has detected all DTMF tones correctly.
User-reported troubles should be investigated using
other tests and verifying other ports on this circuit pack
are working correctly.
Table 10-376. TEST #163 Speech Synthesis DTMF Receiver — Continued
Error
Code
Test
Result Description/ Recommendation
Continued on next page