Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-273release access-endpoint
8
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
Output
For the following output example, the command "release access-endpoint 22502"
was entered. Assume that the access endpoint ports for extension 22502 are in
cabinet 1, carrier C, slot 11, circuit 1 to 6.
Feature Interactions
None.
Port The port address (cabinet-carrier-slot-circuit) of the maintenance
object that is being released.
Maintenance Name The type of maintenance object that is being released. For
wideband access endpoint the maintenance name for each port
is "WAE-PORT." For single port access endpoint the maintenance
name is "TIE-DS1."
Alt. Name The alternate way of identifying the maintenance object. This field
contains the extension number of the access endpoint.
Result An indicator as to whether the object is successfully released.
The possible values are: PASS, FAIL and ABORT.
Error Code A system-generated number that tells why the release failed or
aborted. A detailed list of the codes can be in the
"Busyout/Release Commands" section of this chapter.
release access-endpoint 22502 page 1 of 1
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C1101 WAE-PORT 22502 PASS
01C1102 WAE-PORT 22502 PASS
01C1103 WAE-PORT 22502 PASS
01C1104 WAE-PORT 22502 PASS
01C1105 WAE-PORT 22502 PASS
01C1106 WAE-PORT 22502 PASS
Command Successfully Completed