Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-161enable administered-connection
8
administered connections without interference from other maintenance
processing. This commands restarts the processing of in-line errors for all or the
selected administered connection.
Defaults
None.
Parameters
Help Messages
If the user presses HELP after entering "enable administered-connection", the
following message will be displayed:
Enter assigned administered connection number(1-128) or ’all’
Error Messages
If the administered connection number entered is not "all" and is non numeric, the
following message is displayed:
Identifier invalid
If the administered connection number entered is not within the valid range of
connections, the following message is displayed:
Entry out of range
If the connection number entered is not administered, the following message is
displayed:
Identifier not assigned
If the administered connection number entered is already enabled, the following
message is displayed:
Administered connection already enabled
If the software data cannot be sent to the SAT, the following message will be
displayed:
Error encountered, can’t complete request
If the command entered is in conflict with another currently executing command,
then a message is displayed showing the login id of the conflicting user and the
conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
ac number The number of the administered connection being enabled.
all IF "all" is entered then all administered connections are enabled.