Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-725FL-DATA (Flash Data Consistency)
10
32 FAIL The update files are different in both SPEs. The update file on the
Active SPE is most current.
1. Have INADS issue the copy update-file command. If the update
file copy passes, go to Step 2.
2. Reissue the test card-mem long command to resolve the alarms.
33 FAIL The update files and translations are different in both SPEs. The
Active SPE has the most current update file and translations.
34 FAIL The update files and translations are different in both SPEs. The
Active SPE has the most current update file, and the Standby SPE
has the most current translations.
1. Issue the save translations command to save translations on
both SPEs.
2. Have INADS issue the copy update-file command to copy the
update file from the Active to the Standby SPE.
3. Reissue the test card-mem long command to resolve the alarms.
36 FAIL The update files and load vintages are different in both SPEs. The
Active SPE has the most current update file.
37 FAIL The update files, load vintages, and translations are different in both
SPEs. The Active SPE has the most current update file and
translations.
38 FAIL The update files, load vintages, and translations are different in both
SPEs. The Active SPE has the most current update file, and the
Standby SPE has the most current translations.
1. Follow the procedures for Error Code 4 to get the correct load
vintage. After running the test card-mem long command, check
for Error Codes 32 or 64. Follow the recovery procedure under
the applicable error code.
40 FAIL The update files and announcements are different in both SPEs. The
Active SPE has the most current update file and announcements.
1. Issue the save announcements command to save
announcements on both SPEs.
2. Have INADS issue the copy update-file command to copy the
update file from the Active to the Standby SPE.
3. Run the test card-mem long again to resolve the alarms.
Table 10-205. TEST #421 Flash Data Consistency Check Test — Continued
Error
Code
Test
Result Description/Recommendation
Continued on next page