Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-621test modem-pool
8
test modem-pool
This command will perform hardware diagnostic tests on the specified modem
pool group or an individual member of a specified group.
Synopsis
test modem-pool group
/member [ short | long ] repeat number schedule
Permissions
The following default logins may execute this command: init, inads, system
technician.
Examples
test modem-pool 1
test modem-pool 1 schedule
test modem-pool 1/3 l r 2
test modem-pool 1/3 l r 2 schedule
test modem-pool 2 r 2
test modem-pool 2 l
Description
The "test modem-pool" command performs hardware diagnostic tests on all of
the members that are in a modem-pool group or, on a single member if the
optional member number is supplied.
If the member number is supplied, what is tested depends on the type of
modem-pool group, Combined or Integrated. A Combined modem-pool group
consists of pairs of Analog and Digital Line ports. One pair of Analog and Digital
Line ports used for modem-pooling is called a conversion resource. An
Integrated group, on the other hand, consists of modem-pool circuit packs each
of which contains two conversion resources. Therefore, when a member number
is specified for a Combined modem-pool group, one conversion resource is
tested and when a member number is specified for an Integrated modem-pool
group, two conversion resources are tested.
Defaults
The default for the command is short with a repeat number of 1.