Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-203list mst
8
Version 1 ( default) displays a blank in the version field which is immediately after
the MST message type field. Subsequent versions display the version number
after the MST message type field and are connected with a ’-’. For example:
Version 2 of the X.25 Application error/notification message has added the text of
the pm state table stimulus which was ignored.
Version 1 of MST message type 0xA2 would appear on the ’list mst’ output:
Version 2of MST message type 0xA2 would appear on the ’list mst’ output:
Vector Trace
Message type: 0x10
Message format:
Vector Event Trace (D92 Only)
Message type:
0x11
Number Date/Time Type Message
1 11:41:22:425 A2 17 10
Number Date/Time Type Message
90 12:41:14:112 A2-02 17 10 21 03 32 05 01 80
Message[1-4] = call identifier (CID) (defined in $BASEPJ/hdrs/capro.h)
Message[5-6] = vector number (defined in $BASEPJ/hdrs/dpm_calls.h)
Message[7] = step number (defined in $BASEPJ/hdrs/callr.h)
Message[8] = step type (defined in $BASEPJ/hdrs/dpm_calls.h)
Message[9] = step state (defined in $BASEPJ/hdrs/dpm_calls.h)
Message[10-12] = VDN
Message[13] = port network number
Message[14] = endpoint number
Message[15] = angel number
Message[16] = circuit number
Message[17-20] = trunk number
Message[21+] = auxiliary data (based on step type)