Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-654test signaling-group
8
test signaling-group
This command performs a set of hardware diagnostic tests on the specified
signaling group. The tests vary according to whether a short or long option is
specified.
Synopsis
test signaling-group group identifier
[ short | long ][ repeat number | clear ]
schedule
Permissions
The following default logins may execute this command: system technician,
inads, init.
Examples
test signaling-group 1
test signaling-group 1 repeat 10
test signaling-group 2 short
test signaling-group 4 long
test signaling-group 4 long clear
test signaling-group 2 schedule
Description
The test signaling-group validates that the specified signaling group is
administered and runs a series of diagnostic tests that return results of the test
along with possible error codes to the user.
A signaling group is a collection of B-channels signaled for by a designated
single D-channel or set of D-channels over an ISDN-PRI.
Defaults
The default for the command is short with the repeat of 1.