Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-337save announcements
8
Duplex
If no options are specified, the system saves the announcement to both
processors’ MSS devices.
Parameters
Help Messages
If the system technician presses HELP after entering "save announcements" on a
simplex SPE system the following message is displayed:
Entry is not required
If the system technician presses
HELP after entering "save announcements" on a
duplex SPE system the following message is displayed:
Enter [’spe-active’ or ’spe-standby’]
Error Messages
If the announcement data module cannot be accessed (upload/download port is
active), the following message is displayed:
Announcement data module not available
If the announcement data module is out of service, the following message is
displayed:
Announcement data module out of service
If one or more of the announcement ports are in use, the following message is
displayed:
Announcement port in use; please try later
If there are no announcements on the announcement board, the following
message is displayed:
No announcements on board
If the announcement data module is not administered, the following message is
displayed:
Required announcement data module not administered
spe-active This option forces the system to write the announcement data to the
specified device in the currently active processor.
spe-standby This forces the system to write the announcement data to the specified
device in the standby processor.