Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-277release cdr-link
8
Synopsis
release cdr-link link-id
Permissions
The following default logins may execute this command: system technician,
inads, init.
Examples
release cdr-link primary
release cdr-link secondary
Description
The release cdr-link command will remove the maintenance object associated
with a specified call detail recording (cdr)-link from a maintenance busy state.
A link is made up of several components. It involves a far end data module, a
simulated data channel on a PKTINT board, a manager that initiates and
maintains the link, and a controller/protocol that services the link. A
controller/protocol is usually a transient process that exists for as long as the link
is up. A link is considered up if a physical connection is established. A link can
be considered to be up while no useful work can be performed over it, in this
case the link is insane and should be torn down. These links provide
asynchronous data connections from the switch to peripherals.
For information on what a CDR link is and does, see the second paragraph in the
"Description" section of the "status cdr-link" manual pages.
Defaults
No defaults.
Parameters
Help Messages
If the system technician presses HELP after entering "release cdr-link," the
following message will be displayed:
Enter ’primary’ or ’secondary’
link-id The link identifier is either "primary" or "secondary."