Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-357set tdm
8
Output
The following message indicates that the command completed successfully:
Command successfully completed
The following message indicates that the command was unsuccessful, due to
synchronization not being disabled:
Must disable synchronization-switch first
The following message indicates that the command was unsuccessful, due to the
board not being inserted:
Board not inserted
The following message indicates that the command was unsuccessful, due to an
invalid board being specified (not a DS1 trunk or tone/clock):
Port/Board invalid
The following message indicates that the command was unsuccessful, due to
reasons other than the ones listed above:
Error encountered, can’t complete request
Feature Interactions
None.
set tdm
This command will set which TDM bus has the control channel and dedicated
tones on it.
Synopsis
set tdm port-network pn number bus bus
override
Permissions
The following default logins may execute this command: system technician,
inads, init.
Examples
set tdm port-network 2 bus a
set tdm port-network 2 bus b override