Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-558test card-mem
8
Output
The responses will be displayed on a test-by-test basis with one line of data
displayed for each test result.
For the following output example, the command "test card-mem" was entered.
Port The port address (cabinet-carrier-slot-circuit) of the maintenance
object that is being tested. This object is always associated with
cabinet 1. The carrier is "A" for the control carrier A in a simplex
system, and it can be either "A" or "B" for the control carriers A and
B in a duplex system. The slot and circuit fields of port address for
the maintenance objects, 12V-PWR, CAP-MEM, and CARD-MEM,
are always blank. The port address for maintenance object
"FL-DATA" is blank.
Maintenance Name The type of maintenance object that is being tested -
"CARD-MEM" for the memory card; "12V-PWR" for 12 volt power
supply in TN777B NETCON board; "CAP-MEM" for memory card
capacity; and "FL-DATA" for the data consistency stored in
memory cards in a duplicated switch.
Test No The actual test that is being executed.
Result An indicator such as PASS for test passed, FAIL for test failed,
ABORT for test was aborted.
Error Code A system-generated number that tells why the individual test
failed or was aborted. A detailed list of the codes according to
"Test No." is provided for each maintenance object.
test card-mem a long SPE A
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01A 12V-PWR 701 PASS
01A CARD-MEM 695 PASS
01A CARD-MEM 696 PASS
01A CARD-MEM 697 PASS
01A CARD-MEM 698 PASS
01A CARD-MEM 699 PASS
01A CARD-MEM 694 PASS
01A CARD-MEM 693 PASS
01A CAP-MEM 1014 PASS
FL-DATA 421 PASS
Command successfully completed