DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-427DID-BD (Direct Inward Dial Trunk Circuit Pack)
10
DID-BD (Direct Inward Dial Trunk
Circuit Pack)
Refer to XXX-BD (Common Port Circuit Pack) Maintenance documentation for
circuit pack level errors. See also DID-TRK (DID Trunk) Maintenance
documentation for related trunk information.
1. Where P is the port network number (1 for PPN and 2 or; C is the carrier designation
(for example, A, B, C, D, or E); and SS is the address of the slot in the carrier where
the circuit pack is located (for example, 01, 02, ..., etc.).
MO Name As
It Appears in
Alarm Log
Alarm
Level
Initial System
Technician
Command to Run
1
Full Name of MO
DID-BD MIN test board PCSS sh Direct Inward Dial
Trunk Circuit Pack
DID-BD WRN test board PCSS sh Direct Inward Dial
Trunk Circuit Pack