Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-306release station
8
If the station port resides on an EPN that is unavailable, the following message
will be displayed:
EPN is not available
If the station port resides on a board that is not inserted in the system, the
following message will be displayed:
Board not assigned
If the station port resides on a board that is part of the SCI link, the following
message will be displayed:
Cannot busyout/release part of SCI link
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
Output
For the following output example, assume that the command that was entered is
"release station 1002."
Port The port address (cabinet-carrier-slot-circuit) of the maintenance
object that is being released.
Maintenance Name The type of maintenance object that is being released.
Alt. Name The alternate means of identifying the maintenance object. This
field contains the extension when the object is a station.
Result The result of the release -"PASS," "ABORT," "FAIL."
Error Code A system-generated number that tells why the release failed or
aborted. A detailed list of the codes can be in the
"Busyout/Release Commands" section of this chapter.