Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-47busyout trunk
8
Parameters
Help Messages
If the system technician presses HELP after entering "busyout trunk," the following
message will be displayed:
Enter assigned trunk group number [or group/member]
Error Messages
If the format of the identifier is invalid, the following message will be displayed:
Format invalid
If the range of the trunk group is incorrect, the following error message will be
displayed:
Trunk or trunk group invalid
If the specified trunk group is not administered or has no members, the following
message will be displayed:
Group not assigned, or group assigned but with no member
If the specified member is not administered, the following message will be
displayed:
Group member not assigned
If the specified trunk group is part of the SCI link, the following message will be
displayed:
Cannot busyout/release part of SCI link
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
group The group number is an administered number associated with each
trunk group. The valid range is 1 - 99.
member The member number is an administered number identifying a particular
trunk within a trunk group. The valid range is 1 - 99.