Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-288release modem-pool
8
Synopsis
release modem-pool group
/member
Permissions
The following default logins may execute this command: init, inads, system
technician.
Examples
release modem-pool 1
release modem-pool 4/3
Description
The release modem-pool command will remove the specified modem pool group
or group member from the maintenance busy state. A single group member can
be released by specifying the group number, a "/," and the member number. All
members in a modem pool group can be released by specifying the modem pool
group number only.
Defaults
None.
Parameters
Help Messages
If the system technician presses HELP after entering "release modem-pool" the
following message will be displayed:
Enter assigned group number between 1-5
Or press CANCEL to cancel the command
Error Messages
If the "release modem-pool" command is entered from a login for which the
command is not valid, then the following message will be displayed:
group number The group number is assigned from administration. The group number
may be any administered group from 1-5.
member
number
The member number is assigned from administration. A member is a
pair of analog and digital line ports (or two pair for the Integrated
modem-pool case). The member number may be any administered
group member from 1-32.