Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-598test interface
8
Examples
test interface 01a1 l
test interface 01b2 s r 2
test interface 01b2 s r 2 schedule
test interface b1 l r 25
test interface a2
Description
The test interface command performs hardware diagnostic tests on the
technician specified processor interface circuit pack. In addition to testing the PI
board, the tests will examine the protocol and link interface that is transmitted
over the board.
Defaults
The default for the command is short with the repeat of 1.
Parameters
location The location (cabinet-carrier-position) of the processor interface. The
position determines which processor interface circuit pack will be
cleared. A position of 1 is the first processor interface in the carrier,
while a position of 2 is the second processor interface in the carrier.
short This will cause the command to execute a series of nondestructive
diagnostic tests.
long This will execute a more comprehensive and longer version of the
diagnostic tests. This may involve both destructive and nondestructive
tests.