Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-645test pri-endpoint
8
Error Messages
If the format for the extension is incorrect, the following error message will be
displayed:
Extension invalid
If the EPN on which the PRI endpoint resides is not accessible, the following
message will be displayed:
EPN is not available
If the extension is not administered, the following message will be displayed:
Extension not assigned
If the object associated with the specified extension is not a PRI endpoint, the
following message will be displayed:
Extension assigned to object other than pri-endpoint
If the board that contains the PRI endpoint is not inserted in the system, the
following message will be displayed:
Board not inserted
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
Output
The responses will be displayed on a port-by-port and test-by-test basis with one
line of data displayed for each test result.
Port The port address (cabinet-carrier-slot-circuit) of the maintenance
object that is being tested.
Maintenance Name The type of maintenance object that is being tested. The name for
PRI endpoint port is "PE-BCHL".
Alt. Name The alternate way of identifying the maintenance object. This field
contains the specified extension number of the PRI endpoint.