Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-186list history
8
commands affect state information. For example, "change station" would be
classed as a data command, whereas "display station" would not.
All information in the transaction log is saved on tape as translation data when
the "save translation" command is performed (LIFO order). When the switch
COLD I starts or reboots, the saved translation, and thus the transaction log, will
be loaded from tape. In this way, the translation data and the data in the
transaction log will remain compatible.
Defaults
None.
Parameters
Help Messages
If the system technician presses HELP after entering "list history", the following
message is displayed:
[’print’ or ’schedule’]
Error Messages
None.
Output
print This will cause the report to be printed if a printer is linked to the SAT.
schedule When the "schedule" option is specified, the command is validated and
then a scheduling form is displayed to allow the technician to schedule
execution of the command. The command is then placed in the
command queue and is executed at the specified time. The
information displayed by the command is sent to the system printer
instead of the screen. Refer to the Report Scheduler and System
Printer feature specification [2] for more details.
Date The date the command was issued. Format "mm/dd" where "mm" is the
month and "dd" is the day.
Time The time the command was issued. Format "hh:mm" where "hh" is the
hour and "mm" is the minute.
Port The port field indicates the port type to which the user was connected
when the command was issued.