Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-962M/T-BD (Maintenance/Test Circuit Pack)
10
M/T-BD (Maintenance/Test Circuit
Pack)
!
CAUTION:
In G3iV1.1-286 and G3iV2-386, a TN771D (or later vintage)
Maintenance/Test circuit pack must be used.
Refer to XXX-BD (Common Port Circuit Pack) Maintenance documentation for
circuit pack level errors. See also M/T-DIG (Maintenance/Test Digital Port) and
M/T-PKT (Maintenance/Test Packet Bus Port) Maintenance documentation for
related digital port and Packet Bus port information, respectively.
1. Where P is the port network number (1 for PPN and 2 or 3 for EPN); C is the carrier designation
(for example, A, B, C, D, or E); and SS is the address of the slot in the carrier where the circuit
pack is located (for example, 01, 02, ..., etc.).
MO Name As
It Appears in
Alarm Log
Alarm
Level
Initial System
Technician
Command to Run
1
Full Name of MO
M/T-BD MIN test board PCSS l Maintenance Test Circuit Pack
M/T-BD WRN release board PCSS Maintenance/Test Circuit Pack