DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-419status conference
8
Ts Indication of the talking state of the endpoint - t, m, M, S, blank.
t At the time the command was invoked, voice energy (talking) was
detected from the endpoint.
m At the time the command was invoked, the endpoint indicated to the
MCU that it was muted. It is possible that an endpoint may mute, but
not send any indication to the MCU. In this situation the MCU does not
display a mute indication.
M At the time the command was invoked, the endpoint’s audio was
muted via UDD/CRCS Agent interface. M displays when both the
endpoint and the UCC/CRCS Agent have muted the endpoint audio.
S At the time the command was invoked, the endpoint’s audio was
muted because of solo-audio state set by UCC/CRCS Agent. While in
solo-audio state, new endpoints joining the conference are
automatically muted.
blank At the time the command was invoked voice energy (talking)
was not being detected from the endpoint.
Vs Indication of the MCU video state for this endpoint - a, b, B, c, i, r, R, s,
S, u, U, v, blank.
For quad-screen conferences an * is affixed before the value of Vs to
indicate that an endpoint is currently part of the mixed image. A # may
be affixed before the value of Vs to indicate that an endpoint was fixed
to be in the mixed image (via administration or UCC/CRCS Agent), but
instead, a Fill video is shown in its place. This occurs when the video
of an endpoint that is fixed in a quadrant cannot be used as a video
source because the endpoint is currently not joined to the conference,
has suppressed its video, or has invalid video to be the video source.
Notice that at most four endpoints have an * or # affixed before the Vs
field value.
For quad-screen conference in VAS mode, the mixed image is
broadcast to all endpoints. For quad-screen conference in presentation
mode, the mixed image is return video to the presenter.