Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-302release spe-standby
8
If all of the available maintenance resources are currently in use, then the
following message is displayed:
All maintenance resources busy; try again later
Output
For the following output example the command entered was "release sp-link."
Feature Interactions
None.
release spe-standby
This command allows the technician to release the standby Switch Processing
Element (SPE).
Synopsis
release spe-standby
Port The port address (cabinet-carrier-slot-circuit) of the maintenance
object that is being busied out. For this maintenance object,
blanks are displayed.
Maintenance Name The type of maintenance object that is being busied out.
Alt. Name The alternate means of identifying the maintenance object. This
field contains the extension when the object is a station, and it
contains xxx/yyy when the object is a trunk, where xxx is the trunk
group number and yyy is the member number. It contains P/xxx
when the object is a private CO line, where xxx is the private CO
line group number.
Result An indicator as to whether the object was successfully busied
out.
Error Code A numerical description of why the command failed.
release sp-link SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
SYS-PRNT PASS
Command Successfully Completed